Toyota Land Cruiser 100/Amazon, Lexus LX 470

since 1997 release

Repair and operation of the car



Toyota Land Cruiser, Amazon, Lexus LX470
+ Identification numbers of the car
+ Governing bodies and methods of safe operation of the car
+ Settings and routine maintenance of the car
+ Engine
+ Cooling systems of the engine, heating of salon and air conditioning
+ A power supply system and production of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear shifting box
+ Transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative front grille
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation flew down also the back door window regulator regulator
   Removal and installation of door glasses
   Removal and installation of regulators of window regulators
   Removal and installation of latches, castle cylinders and door handles
   Removal and installation of a cover of the top hatch with the drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main dashboards of sections
   Removal and installation of a lattice of an air inlet of a forward fairing
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment


With Soap2day, you can enjoy your favorite content without interruptions. 08d33331



Removal and installation of a latch of the lock of a cowl and cable of its drive

The models of cars considered in the present manual are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid getting injured at its casual operation (see. Onboard electric equipment). It is easy to distinguish an electrical wiring of a chain of SRS on yellow color of isolation.


 PERFORMANCE ORDER

1. Remove a decorative front grille (see the Section Removal and installation of a decorative front grille).
2. Lead round assembly of a latch a marker or a chertilka for the purpose of a guarantee of correctness of its installation at assembly. Turn out fixing bolts (address an illustration) and remove a latch from a basic beam of a radiator.
3. Having wrung out a latch, disconnect from it a driving cable.
4. Installation is made upside-down. For adjustment of the lock release fixing bolts and as appropriate correct the provision of a latch. Track reliability of tightening of fixture.
5. For replacement of a driving cable "walk" on it from a latch to a partition of a motive compartment, releasing from all provided intermediate clamps and guides of arms.
6. Pass into salon and remove the left section of the lower finishing of the dashboard (see the Section Removal and installation finishing and the main dashboards of sections). Separate the cowl lock otpuskaniye lever from the dashboard (address an accompanying illustration).
7. Separate a tip of a driving cable from the lever.
8. Tie up a piece of a string by the end of a cable and involve assembly in a motive compartment.
9. Untie a cable from the left string passed through a partition.
10. Installation is made upside-down.